Walk-In Chamber for Complex Salt Spray Testing (Temperature Controllable)
Bellue’s BE-8209 series provides walk-in chamber configurations for complex salt spray projects with temperature and humidity requirements. Confirm specimen size and load, corrosion method, cycle profile, and the quoted equipment scope.
Technical Parameters
| Product Name | Complex Salt Spray Test Chamber | |
| Model No. | BE-8209-12m³ | BE-8209-15m³ |
| Internal Dimension | W2000 X D3000 X H2000 mm | W2500 X D3000 X H2000 mm |
| External Dimension | W2400 X D5000 X H3000 mm | W2900 X D5000 X H3000 mm |
| Max Load | 1000KG for battery pack | |
| Temp. Range | 0℃～+85℃ | |
| Temp. Fluctuation | ±0.5℃ | |
| Temp. Deviation | 2℃ | |
| Spray Capacity | 1~2mL/80cm2/hr (Collect at least 16 hours, take the average ) | |
| Spray Pressure | 1.00±0.01kgf/cm² | |
| Resolution | Temp: 0.01℃, Humidity:0.01%R.H. | |
| Humidity Range | 30%–98%R.H. | |
| Humidity Fluctuation | ±3%R.H. | |
| Potion PH | Neutral 6.0～7.0 Acidity 3.0～3.1 | |
| Spray Solution PH | Neutral 6.5～7.2 Acidity 3.1～3.3 | |
| Test Time Range | 1S ～ 9999H (Settable) | |
| Control Mode | Touch screen programmable control PLC, networking; mobile phone APP alarm; with USB interface, with RJ485 interface can be connected to computer control, exclusive network control software. Remote monitoring and data acquisition. | |
| Internal material | Acid and alkali resistant SUS316 material | |
| External material | Cold and heat resistant steel plate with spray coating | |
| Cooling Mode | Air cooling / water cooling | |
| Total Weight | Approx 7 Tons | |
| Power Supply | AC 380V, 55KW | |
| Other Auxiliary Functions | *Main-subsidiary type trolley for the specimen in and out of the test chamber.*Explosion-proof, Pressure relief, Smoke Exhaust, Fire extinguishing, Video monitoring. | |
Standards and Method Review
UL 2580 is listed for project review. Confirm the applicable standard edition and corrosion test procedure before selecting the chamber. Define the required solution, collection measurements, environmental conditions, cycle sequence, and acceptance criteria in the approved test plan.
Details to Define in the RFQ
- Specimen dimensions and mass, mounting arrangement, and chamber loading access.
- Salt spray, temperature, and humidity conditions required by the test method.
- Cycle duration and sequence, specimen operating state, monitoring, and data recording.
- Water, air, power, drainage, exhaust, and site installation requirements.
- Quoted handling equipment and protective functions for the specific project.
